Domestic turbines
• 2.5kW turbine
• Residential use
• Mast height up to 11m

The 2.5kW Proven wind turbine is the smallest turbine that we supply. In a typical wind speed of 5m/s it will produce between 2,500 – 5,000kWh of electricity per annum. It is designed to be mast mounted and supply power for smaller domestic dwellings. There are 2 mast sizes available, 6.5m and 11m.

Due to the turbines size and weight, it is unsuitable for roof mounting to domestic properties. Special considerations may be taken if wanting to mount to a large, strong, flat roof. The turbine may not be suitable for properties in built up areas due to restricted air flow and turbulence.

Overview
Rated Output: - 2500W (2.5kW)
Voltages available: - 12V / 24V / 48V / 120V / 240V / 300V
Annual Output - 2,500-5,000 kWh*
Rotor Diameter: - 3.5m
Hub Height: - 6.5m / 11m
* Based on an ideal site and average wind speed of 5m/s

Recommended Location spec
• Min Average wind speed – 5m/s at 10m agl**
• Min Installation Space – 15m x 3.5m
• Surrounding area should be free from obstructions for a distance of 5 x Rotor Diameter in any direction
• Access for lorry, concrete mixer, JCB or similar
• Ventilated indoor wall space of 1m x 1.5m is required for control gear (ideally close to fuse board)
**agl – Above Ground Level

For a quotation please contact our office. Rotary Engineering's wind turbine experts can discuss your site and electricty requirements, helping you choose the correct turbine for your needs. We can also arrange site surveys and guide you through the planning process.

For more information about domestic wind turbines, contact the Rotary Office here.

original equipment manufacture - bespoke design solutions - magnets - wind turbines
home - profile - contact us - site map